TP-Link T1500-28PCT User Manual page 693

Configuring IPv6 IMPB
Follow these steps to configure IPv6-MAC Binding via DHCPv6 Snooping:
1) In the Global Config section, globally enable DHCPv6 Snooping. Click Apply.
2) In the VLAN Config section, enable DHCPv6 Snooping on a VLAN or range of VLANs.
Click Apply.
VLAN ID
Status
3) In the Port Config section, configure the maximum number of binding entries a port can
learn via DHCPv6 snooping. Click Apply.
Port
Maximum Entries
LAG
4) The learned entries will be displayed in the Binding Table. You can go to SECURITY >
IPv6 IMPB > IPv6-MAC Binding > Binding Table to view or edit the entries.
2.1.4 Viewing the Binding Entries
In the Binding Table, you can view, search and edit the specified binding entries.
Choose the menu SECURITY > IPv6 IMPB > IPv6-MAC Binding > Binding Table to load the
following page.
Figure 2-4 Binding Table
You can specify the search criteria to search your desired entries.
Displays the VLAN ID.
Enable or disable DHCPv6 Snooping on the VLAN.
Displays the port number.
Configure the maximum number of binding entries a port can learn via DHCPv6
snooping.
Displays the LAG that the port is in.
IPv6-MAC Binding Configuration
Configuration Guide 670