Backing Up The Configuration File; Upgrading The Firmware - TP-Link T1500-28PCT User Manual

Managing System
Note:
It will take some time to restore the configuration. Please wait without any operation.
The following example shows how to restore the configuration file named file1 from the
TFTP server with IP address 192.168.0.100.
Switch>enable
Switch#copy tftp startup-config ip-address 192.168.0.100 filename file1
Start to load user config file...
Operation OK! Now rebooting system...

4.2.3 Backing up the Configuration File

Follow these steps to back up the current configuration of the switch in a file:
Step 1 enable
Enter privileged mode.
Step 2 copy startup-config tftp ip-address ip-addr filename name
Back up the configuration file to TFTP server.
ip-addr
supported.
name
The following example shows how to backup the configuration file named file2 to TFTP
server with IP address 192.168.0.100.
Switch>enable
Switch#copy startup-config tftp ip-address 192.168.0.100 filename file2
Start to backup user config file...
Backup user config file OK.

4.2.4 Upgrading the Firmware

Follow these steps to upgrade the firmware:
Step 1 enable
Enter privileged mode.
: Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are
: Specify the name of the configuration file to be saved.
System Tools Configurations
Configuration Guide 57