26
BOC RAPTOR 200C & 250R MIG Operating manual
11.0 Warranty Information
11.1 Terms of Warranty
The Raptor machine has a limited warranty that covers
manufacturing and material defects only. The warranty is affected
on the day of purchase and does not cover any freight, packaging
and insurance costs. Verbal promises that do not comply with terms
of warranty are not binding on warrantor.
11.2 Limitations on Warranty
The following conditions are not covered under terms of warranty:
loss or damage due to or resulting from natural wear and tear,
non-compliance with operating and maintenance instructions,
connection to incorrect or faulty voltage supply (including
voltage surges outside equipment specs), incorrect gas pressure
overloading, transport or storage damage or fire or damage due
to natural causes (e.g. lightning or flood). This warranty does not
cover direct or indirect expenses, loss, damage of costs including,
but not limited to, daily allowances or accommodation and
travelling costs.
Modification of the 15A primary input plug or fitment of a lower
rated primary input plug will render the warranty null and void.
NOTE
Under the terms of warranty, welding torches and their consumables are
not covered. Direct or indirect damage due to a defective product is not
covered under the warranty. The warranty is void if changes are made
to the product without approval of the manufacturer, or if repairs are
carried out using non-approved spare parts. The warranty is void if a non-
authorised agent carries out repairs.
2
11.3 Warranty Period
The warranty is valid for 2 years from date of purchase provided
the machine is used within the published specification limits.
11.4 Warranty Replacement
BOC Ltd must be informed within the warranty period of any
warranty defect. The customer must provide proof of purchase and
serial number of the equipment when making a warranty claim.