Checking Tcp/Ip Settings (Windows 2000) - Siemens Gigaset SE568 Series User Manual

SE567/SE568 Series Residential Gateway User's Guide

Checking TCP/IP Settings (Windows 2000)

1.
On the Windows taskbar click Start>Settings>Control Panel. This
displays the "Control Panel" window.
2.
Double-click Network and Dial-up Connections. This displays the
"Network and Dial-up Connections" window.
3.
Right-click Local Area Connection and select Properties. This
displays the "Local Area Connections Properties" window.
4.
Select the TCP/IP protocol for your network card.
5.
Click Properties. This displays the "Internet Protocol (TCP/IP)
Properties" window.
6.
Select the Obtain an IP address automatically and Obtain DNS server address automatically
options. Exit back to the Control Panel.
7.
Restart your computer to ensure it obtains an IP address from the Gateway.
8.
Configure internet access using the procedure described in
Operating System Configuration
Internet Access
12
Configuration.