Table of Contents
Advertisement
SE567/SE568 Series Residential Gateway User's Guide
Internet Access Configuration
Windows users must configure their computers to use the Gateway for Internet access. Ensure that the
Gateway is installed correctly and the DSL line is functional. Then follow the appropriate procedure below
to configure your Web browser to access the Internet via the LAN, rather than by a dial-up connection.
For Windows 9x/2000
1.
Select Start>Settings>Control Panel to display the Control Panel.
2.
Double-click the Internet Options icon. This displays the "Internet Properties" window.
3.
Click the Connections tab.
4.
Click Setup.
5.
Click I want to set up my Internet connection manually, or I want to connect through a local
area network (LAN), then click Next. This displays the "Internet Connection Wizard" window.
6.
Click I connect through a local area network (LAN), then click Next. This displays the "Local Area
Network Internet Configuration" window.
7.
Ensure all the boxes are deselected, then click Next. This displays the "Set Up your Internet Mail
Account" window.
8.
Click No, then click Next. This displays the "Completing the Internet Connection Wizard" window.
9.
Click Finish to close the Internet Connection Wizard. Setup is now complete.
10.
Configure the Gateway using the procedure described in the next chapter.
For Windows XP
1.
Select Start>Control Panel.
2.
Double-click the Internet Options icon. This displays the "Internet Options" window.
3.
Click the Connections tab.
4.
Click Setup. This starts the New Connection Wizard.
5.
Click Next.
6.
Select Connect to the Internet, then click Next.
7.
Select Setup my connection manually, then click Next.
8.
Select Connect using a broadband connection that is always on, then click Next.
9.
Click Finish.
10.
Configure the Gateway using the procedure described in the next chapter.
Operating System Configuration
16
Advertisement
Table of Contents
