Toro 39521 Operator's Manual page 41

4. Slowly pour approximately 80% of the specified
oil into the filler tube, and slowly add the
additional oil to bring it to the Full mark
42).
5. Start the engine and drive to a flat area.
6. Check the engine-oil level.
7. Reset the engine-oil service reminder; refer to
Resetting the Engine-Oil Maintenance Reminder
(page 41).
Resetting the Engine-Oil
Maintenance Reminder
1. Prepare the machine for maintenance; refer to
Preparing the Machine for Maintenance (page
34).
Note:
You must engage the parking brake to
reset the maintenance reminder.
2. Cycle the key switch between the
and the position 4 times within 8 seconds.
OFF
The Service Engine screen displays and flashes
(Figure 43).
Figure 42
RUN
(Figure
3. Press down the multi-function switch.
The engine-oil maintenance reminder resets to
100.0 (hours), exits the Service Engine screen,
and returns to the default screen.
Note:
You can exit the Service Engine screen at
any time by turning the key to either the OFF or the
START positions.
Changing the Engine-Oil Filter
Service Interval: After the first 5 hours (more
g026005
Every 100 hours (more often in extremely dusty
or sandy conditions).
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Place a rag under the oil filter to soak up any
spilled oil.
Important:
engine. Wipe up any spilled oil.
3. Change the engine-oil filter
position
41
Figure 43
Service Engine Screen
often in extremely dusty or sandy
conditions).
40).
Spilled oil may drain under the
(Figure
g212117
Changing
44).