Toro 39521 Operator's Manual page 13

1. Hour
meter/tine-engagement
display
2. Operator weight
adjustment control
3. Multi-function switch
4. Left motion-control lever
5. Front reference bar
6. Throttle lever
Parking-Brake Handle
The parking-brake handle is located on the control
console, to the right of the key switch
Note:
The brake handle engages a parking brake in
each of the transmissions.
•
To engage the parking brake, pull the handle out
and slide it rearward.
•
To release the parking brake, push the handle
forward into the detent.
When parking on a steep slope, chock or block the
wheels in addition to engaging the parking brake. Tie
down the machine and engage the parking brake
when transporting the machine.
Figure 8
7. Choke lever
8. Right motion-control lever
9. Ignition switch
10. Parking-brake handle
11. Tine ground-engagement
foot switch
(Figure
Hour Meter/Tine Engagement
Display
Located to the left of the ignition switch on the control
console.
•
The hour meter monitors and displays the engine
hours.
g267524
1. LCD Indicators/Information screen
2. Hour display
3. LED status light
Hours are displayed when the key is off or when
the machine is running. Hours are not displayed
when the machine is aerating.
Note:
brake setting when it meets the "safe to start"
mode (parking brake engaged).
•
The tine-engagement display monitors and
displays the electronic tine-depth setting.
8).
1. LCD Indicators/Information screen
2. Tine depth status bar
3. Tine depth setting indicator
4. LED status light
13
Figure 9
Hour meter display
The LCD indicator appears in the park
Figure 10
Tine-engagement display
g211730
g211731