Table of Contents
Advertisement
Figure 26
4.
To turn left or right, pull the motion-control lever
back toward neutral in the desired turn direction.
The tines can be in the down position when
making gradual turns.
5.
To make zero-turns, lift your foot off the tine
engagement foot switch control to raise the
tines. The head raises in 1 second.
Important:
Do not make a zero-turn when
the tines are down, otherwise you may tear
the turf.
6.
To stop the machine, move both motion-control
levers to the neutral position.
Driving in Reverse
1.
Move the motion-control levers to the neutral
position.
2.
To move rearward in a straight line, slowly move
both levers rearward with equal pressure.
Figure 27
3.
To turn left or right, release pressure on the
motion-control lever toward the desired turn
direction.
4.
To make zero-turns, lift your foot off the
tine-elevation switch to raise the tines. The head
raises in 1 second.
Important:
the tines are in the down position.
5.
To stop the machine, position both motion-control
levers in the neutral operate position.
Adjusting the Front
Reference/Speed-Control Bar
Adjust the front reference/speed control bar for
desired maximum forward speed.
g016672
1.
Stop the machine and move the motion-control
levers to the N
2.
Loosen the nuts on each side of the control
panel
(Figure
1. Nut
3.
Move the bar forward to obtain the fastest speed.
Move the bar rearward to obtain the slowest
speed.
4.
On both sides, tighten the nuts and bolts.
Important:
Ensure that the nuts and bolts are
tight so that the front reference/speed-control bar
does not move during operation.
g016673
27
Do not make a zero-turn when
position.
EUTRAL
28).
Figure 28
2. Front
reference/speed-control
bar
g270084
Advertisement
Table of Contents
