Advertisement

MA0609-EB
Introduction
Thank you for purchasing this CASIO product. To ensure that it can
provide you with the years of service for which it is designed, be sure to
read this manual carefully and follow the instructions contained herein.
Make sure you read the Safety Precautions before using this product for
the first time.
Note that the measurement functions of this product are not
intended for use in applications where special instruments are
required. The readings produced by this product are reasonably
accurate approximations only.

Safety Precautions

Symbols
This manual and the product itself use various symbols that are intended
to ensure safe operation of the product, to prevent injury to you and
others, and to protect against material damage and loss. The following
explains the meanings the symbols.
Example Symbols
The
symbol indicates a caution. The symbol to the left
indicates an electric shock caution.
The
symbol indicates something you must not do. The
symbol to the left indicates that you should not try to
disassemble something.
The
symbol indicates something you must do. The
symbol to the left indicates that you must unplug the
power cord from the power outlet.
Danger!
Warning!
Caution!
Do not use this product while scuba diving (aqualung).
• This product is not a diving watch. Improper use of this
product can lead to serious accident.
Never try to remove the watch's rechargeable (secondary)
battery. Leave all built-in battery replacement operations up
to your original retailer or authorized CASIO service center.
Whenever the watch's built-in battery is removed from the
watch, take care to ensure that it is not swallowed
accidentally. Special care is required where young children
are present.
Keep batteries out of the reach of small children. Should a
battery ever be swallowed accidentally, contact a physician
immediately.
AC Adaptor and Charger Unit
Should you ever notice any abnormality such as smoke,
strange odor, or excessive heat being emitted by the AC
adaptor or charger unit, immediately unplug the AC adaptor
from the power outlet and contact your original retailer or
authorized CASIO service center.
Do not allow long-term contact between your skin and the
AC adaptor or charger unit while it is conducting electricity,
or with the watch while it is being charged. Long term
contact creates the risk of low-temperature burn injury.
Operation Guide 2886
Disregarding information with this label creates
the risk of death or serious personal injury.
Disregarding information with this label could
possibly create the risk of death or serious
personal injury.
Disregarding information with this label could
possibly create the risk of personal injury or
material loss.
Warning!
Built-in battery
Warning!
AC Adaptor and Charger Unit
Never allow water or foreign matter to get inside the AC
adaptor or charger unit, and do not allow them to become
wet. Should water or foreign matter get into the AC adaptor
or charger unit, immediately turn off power, unplug the AC
adaptor from the power outlet, and contact your original
retailer or authorized CASIO service center.
Failure to observe the following points concerning the AC
adaptor and charger unit creates the risk of fire and
personal injury.
• Do not use or leave the AC adaptor or charger unit near
a heater or any other source of heat.
• Do not use or leave the AC adaptor or charger unit in a
bathroom, near a humidifier, or in any other location
where it is exposed to splashing water or moisture.
• Never touch the AC adaptor or charger unit while your
hands are wet.
• Never expose the AC adaptor or charger unit to flame or
heat.
• Never try to take the AC adaptor or charger unit apart or
modify it in any way.
• Never short AC adaptor or charger unit terminals through
contact with needles, pins, or other metal objects.
• Take care not to drop the AC adaptor or charger unit or
otherwise subject it to strong impact.
• To ensure safety during lightning storms, unplug the AC
adaptor from the power outlet.
• Be sure to grasp the plug when unplugging the AC
adaptor.
• Never use the watch, AC adaptor, or charger unit while it
is covered by a blanket, etc.
• Keep the AC adaptor and charger unit out of the reach of
small children.
• Be sure to unplug the AC adaptor from the power outlet
before leaving on a trip or otherwise leaving it
unattended for long periods.
Caution!
Caring for Your Watch
A dirty or rusty case or band can soil the sleeve of your
clothing. Be sure to keep the case and band clean at all
times. Rust tends to form easily after the watch is exposed
to seawater and then left without cleaning.
Skin Irritation
Since the watch and the band come into direct contact with
the skin, the following conditions may cause irritation of the
skin.
• When a wearer is allergic to metal or leather
• When the watch or band is rusty dirty, sweaty, etc.
• When the wearer is in poor physical condition
• Tightening the band too tightly can cause you to sweat,
and can make it hard for air to pass under the band,
which can lead to skin irritation. Do not over-tighten the
band.
• The bacterial and odor resistant band suppresses the
formation of organisms and bacteria due to sweat, and
related odors. It does not protect against skin rash.
• Should you ever notice any abnormality, immediately
stop using the product and consult a physician.
Using the Auto Light
It is recommended that you turn off the Auto Light while
driving or riding in a motor vehicle. Unintended illumination
can distract the operator and create the risk of traffic
accident.
Never try to take the watch apart!
Never try to take the watch apart. Doing so creates the risk
of personal injury and malfunction of the watch.
1

Advertisement

Table of Contents
loading

Summary of Contents for Casio 2886

  • Page 1: Safety Precautions

    Warning! AC Adaptor and Charger Unit Thank you for purchasing this CASIO product. To ensure that it can Never allow water or foreign matter to get inside the AC provide you with the years of service for which it is designed, be sure to adaptor or charger unit, and do not allow them to become read this manual carefully and follow the instructions contained herein.
  • Page 2: General Guide

    Operation Guide 2886 Current Time and Date Screen (Timekeeping Mode) Caution! Month Use of the Product Year To avoid unexpected accidents, always check around you to ensure you are in a safe place before looking at the Day of the Week display of the watch.
  • Page 3 Operation Guide 2886 Modes Press the C button to cycle between modes. The letters “GPS” stand for “Global • The watch will return to the Timekeeping Mode automatically if you do Positioning System”, which was developed not perform any button operation in the Guide Mode, Recall Mode, or and is operated by the United States Alarm Mode.
  • Page 4: Charging The Built-In Battery

    Operation Guide 2886 I Illumination Charging the Built-in battery An EL (electro-luminescent) panel is used for display illumination. Use one of the following procedures to charge the built-in battery before To turn on illumination manually using the watch for the first time or whenever the “LOW BATTERY”...
  • Page 5 • Should the AC adaptor’s power cord become damaged (internal wires exposed, shorted, etc.), request repair from your original retailer or authorized CASIO service center. Using a damaged power cord creates the risk of fire, malfunction, and electric shock. • The AC adaptor will become warm to the touch during charging. This is normal and does not indicate malfunction.
  • Page 6 Operation Guide 2886 I Elapsed Time Measurements G Specifying the Target Pace You can specify the target distance and time, and have the watch emit a The procedures for stopwatch elapsed time measurement are the same pace beeper when the distance you specified is reached during a regardless of whether or not GPS measurement is used.
  • Page 7: Deleting Records

    Operation Guide 2886 G Performing Stopwatch Operations Using GPS Recalling Memory Contents Measurement • The watch will not be able to receive GPS data if a stopwatch elapsed The Recall Mode lets you recall the data you store in memory during a time measurement operation is started before GPS measurement is stopwatch measurement operation.
  • Page 8 Operation Guide 2886 3. Press the E button to execute the 2. After GPS measurement is complete, use the E and B buttons to move the arrow operation you selected in step 2. • If you selected “YES”, all records in ( ) to the memory where you want to memory will be deleted.
  • Page 9: Using The Timer

    Operation Guide 2886 5. Press the A button to display the To delete a destination distance and direction between the two 1. While the base point record screen is points. displayed, press the A button to display the destination (GOAL POINT) list.
  • Page 10: Using World Time

    Operation Guide 2886 I Timer Types Using World Time There are two different settings that you can use in order to configure the timer as describe below. World Time lets you display the current time in any one of 141 cities (38 time zones) around the world.
  • Page 11 Operation Guide 2886 The alarm on indicator is displayed when the alarm is turned on, and the Using the Alarm and Hourly Time Signal hourly time signal on indicator is displayed while the hourly time signal is turned on. The watch beeps for 10 seconds when the Timekeeping Mode time reaches the currently set alarm time.
  • Page 12 Operation Guide 2886 2. Use the E (westward) and B (eastward) To adjust display contrast (Eastward) buttons to scroll through city names until • Use the E and B buttons to adjust Contrast (0 to 9) the one you want to use as your Home display contrast as a value from 0 City is displayed.
  • Page 13: Display Messages

    Operation Guide 2886 Display Messages City Name List City Message When Displayed Meaning City Name Country Name Code Differential DATA ERROR When configuring The speed calculated using –12.00 Eniwetok Atoll target pace settings the specified distance and –11.00 Pago Pago American Samoa time is too fast.
  • Page 14 Operation Guide 2886 City City City Name Country Name City Name Country Name Code Differential Code Differential +01.00 Milan Italy +10.00 Melbourne Australia Amsterdam Holland Sydney Australia Lagos Nigeria Guam Guam (U.S. Territory) Oslo Norway Vladivostok Russian Federation Warsaw Poland +10.50...

Table of Contents