Time Adjustment; Using Watch Operations To Adjust The Time And Day Settings - Casio Edifice EQB-1200D-2AER Operation Manual

Table of Contents

Advertisement

Time Adjustment

Your watch can connect with a phone to obtain
information that it uses to adjust its date and
time setting.
Important!
Disable auto time adjustment
whenever you are in a hospital, inside
an aircraft, or in any other area where
use of a phone is prohibited or
restricted.
Using the Watch in a Medical
l
Facility or Aircraft
Referring to the information below, configure
the time setting in accordance with the method
that suits your own lifestyle.
Do you use a phone?
Time adjustment by connecting with your
phone is recommended.
Auto Time Adjustment
l
Other than the above.
You can adjust time settings by
performing operations on the watch.
Using Watch Operations to Adjust the
l
Time and Day Settings
Watch Operation Guide 5666
Using Watch Operations to
Adjust the Time and Day
Settings
1.
Pull out the crown to the second click.
This causes the second hand to move to
12 o'clock, and enables the hour and
minute setting operation.
Each press of (A) cycles through
available setting items in the sequence
shown below.
2.
Rotate the crown to change the hour and
minute settings.
While checking if the 24-hour hand is
indicating a.m. (right side) or p.m. (left
side), set the desired time.
3.
Press (A).
This enables the year ten's digit setting
operation.
4.
Rotate the crown to move the second
hand to the desired setting for the year
ten's digit.
Second hand
Crown
Hours, minutes
Year (10's digit)
Year (one's digit)
Month
Day
Year (10's digit)
00
10
20
90
30
80
40
70
50
60
5.
Press (A).
This enables the year one's digit setting
operation.
6.
Rotate the crown to move the second
hand to the desired setting for the year
one's digit.
Year (one's digit)
0
1
9
8
7
5
6
7.
Press (A).
This enables the month setting operation.
8.
Rotate the crown to change the month.
12
11
1
10
9
8
7
5
6
Month
9.
Press (A).
This causes the second hand to move to
12 o'clock, and enables the day setting
operation. The function hand will move
slightly at this time.
The function hand will move repeatedly
while the day setting is being changed.
Hand and Day Indicator Movement
l
10.
Rotate the crown to change the day.
Day
11.
On a time signal at the top of a minute,
push the crown back in.
2
3
4
2
3
4
15

Advertisement

Table of Contents
loading

Table of Contents