Turning Off The Alarm; Adjusting Hand And Day; Indicator Alignment; Using Edifice Connected To Adjust Hand And Day Indicator Alignment - Casio Edifice EQB-1200D-2AER Operation Manual

Turning Off the Alarm

If you leave the alarm turned on, it will sound
every day at the preset alarm time.
To stop the alarm from sounding, perform the
steps below to turn it off.
To have the alarm sound again, turn it on.
●
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o'clock, and the function hand to move
to [DT].
Function hand
2.
Press (A).
This causes the function hand to move to
[ALM] and turns on the alarm.
3.
Press (B) to move the second hand to off.
Each press of (B) toggles between on
●
and off.
Second hand
Alarm off
Alarm on
4.
Push the crown back in.
Watch Operation Guide 5666
Adjusting Hand and
Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
Using EDIFICE Connected to
Adjust Hand and Day

Indicator Alignment

If the watch is paired with a phone, you can
also use EDIFICE Connected to adjust hand
and day indicator positions.
Crown
Adjusting Hand and Day Indicator
l
Alignment

Adjusting Hand and Day

Indicator Alignment
1.
Pull out the crown to the second click.
This causes the second hand to move to
12 o'clock.
2.
Hold down (B) for at least five seconds
until the watch beeps. Release the button
when you hear the beep.
This causes the second hand to perform
one full revolution and enables
adjustment of second hand alignment.
3.
Rotate the crown to align the second hand
with 12 o'clock.
Day Indicator
Alignment
Second hand
Crown
4.
Press (B).
This enables adjustment of hour hand,
minute hand, and 24-hour hand
alignment.
Minute hand Hour hand
5.
Rotate the crown to align the hour hand,
minute hand, and 24-hour hand with 12
o'clock.
6.
Press (B).
This enables adjustment of small hour
hand, small minute hand, and small 24-
hour hand alignment.
Small hour hand
Small minute hand
Small 24-hour hand
7.
Rotate the crown to align the small hour
hand, small minute hand, and small 24-
hour hand with 12 o'clock.
8.
Press (B).
This enables function hand and day
indicator alignment.
Day indicator
Function hand
24-hour hand
19