Key Operation; On/Off; Assist Level; Toggle Displays - SCIWIL SW-M808X User Manual

E-bike display
Table of Contents

Advertisement

3. Key Operation

Key operation guide as follows:
Press and Hold: means press and hold the key(s) for more than 2s.
Press: means press the key(s) for less than 0.5s.
Double Tap: means double tap the key(s) within 0.3s

3.1 On/Off

Turn on the Display: When the display is off, press and hold the On/Off Key
to turn on the display, it will show boot interface and then enter riding
interface. (If boot password is activated, enter the boot password at start).
Turn off the Display: When the display is on, press and hold the On/Off
Key, the display will be turned off. If no operation is engaged for 10min
(0km/h), the display will be auto-off. Auto-off time can be set in the
Settings.

3.2 Assist Level

Press the Plus Key or Minus/Walk Assist Key to switch assist levels. There are
5 levels by default: 0/1/2/3/4/5. 0 means no assist power.

3.3 Toggle Displays

When the display is on, press the Info Key to toggle among ODO (total
range), Trip (single trip range), TIME (riding time) etc.

3.4 Light On/Off

Turn on the Front Light: when the front light is off, press the Light Key to
turn it on, and the light icon will be shown on the riding interface (to remove
this functions, please reconfigure the controller).
Turn off the Front Light: when the front light is on, press the Light Key to
turn it off, and the light icon will be off on the riding interface.

3.5 Walk Assist Mode

Engage Walk Assist Mode: On the riding interface, press and hold the
- 9 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SW-M808X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF