Ⅰ. Safety Notes PLEASE TAKE CAUTION WHEN USE,DO NOT PLUG OR UNPLUG THE DISPLAY WHILE YOUR E-BIKE IS POWERED ON. AVOID CLASHES OR BUMPS TO THE DISPLAY. AVOID USING IN HEAVY RAINS, SNOWS OR LONG EXPOSURE TO STRONG SUNLIGHT.
1. Product Name and Model Product Name: E-Bike Display Product Model: SW-G518 2. Product Introduction SW-G518 features high-brightness anti-glare color LCD and minimalist interface, working as an ideal HMI solution for EN15194 electric bikes. 3. Specifications Working Voltage: DC 24V/36V/48V/60V/72V ...
Walk assist mode Front light indication: front light status supported by controller. Error code indication Riding Info: Braking Status, Front Light Status, Cruise, Low Voltage. Turning Signals: This function works with controller. Dual Drive Control and Display: This function works with controller. ...
Open the holder ring/rubber spacer of the keypad and fix it on the ② handlebar, adjust it to a proper facing angle. Use a M3 Hex Wrench to fix and tighten the screws. Standard fixing torque: 1N·m. *Damage due to excessive fixing torque is not covered by warranty. Plug the 5-pin connector of the display to the coupling connector of the ③...
There are 5 keys on the SWK2 keypad, in the following instructions: is called Plus Key; is called On/Off Key; is called Minus/Walk Assist Key Key; 3. Key Operation Key operation guide as follows: Press and Hold: means press and hold the key(s) for more than 2s. Press: means press the key(s) for less than 0.5s.
(to remove this functions, please reconfigure the controller). Turn off the Front Light: when the front light is on, press and hold the Plus Key to turn it off, and the light icon will be off on the riding interface. 3.5 Walk Assist Mode Engage Walk Assist Mode: On the riding interface, press and hold the Minus/Walk Key to enter walk assist mode.
Page 10
0: never, other value means auto-off time interval. Unit: minute P05: Pedal Assist Level 0-3 Level Mode;1-3 Level Mode (no Level0) 0-5 Level Mode;1-5 Level Mode (no Level0) 0-9 Level Mode;1-9 Level Mode (no Level0) P06: Wheel Size. Unit: inch; Increment: 0.1. ...
P13: Magnets Number in Pedal Assist Sensor. 3 Types: 5/8/12pcs. P14: Current Limit Value. By default: 12A. Range: 1-20A. P15: Display Low Voltage Value. P16: ODO Clearance. Press and hold the Up key for 5s and ODO value ...
Note: For waterproof connectors, wire sequences are concealed. IV. Warranty In compliance with local laws, Sciwil provides limited warranty period covering 24 months after the date of manufacturing (as indicated by the serial number), applies to quality issues during normal operations.
V. Version This display user manual is in compliance with the general software version (A/0) of Changzhou Sciwil E-Mobility Technology Co., Ltd. There are chances that display products on some e-bikes may have a different software version, which is subject to the actual version in use.
Need help?
Do you have a question about the SW-G518 and is the answer not in the manual?
Questions and answers