Table of Contents
Advertisement
CAUTION:
It is highly recommended that you use a screwdriver with a magnetic tip when removing or replacing screws on the Fiery
QuickTouch. If you do not, the screws you remove or replace might fall inside the Fiery QuickTouch device.
■ To remove the Fiery QuickTouch
1. Follow the instructions to remove the side and front chassis covers.
2. To remove the top bezel, slide the bezel forward and release it from the top of the chassis.
3. Stabilize the unit and set the Fiery QuickTouch on its side atop the unit.
37
4. REPLACING PARTS
Advertisement
Table of Contents
