Canon ImagePRESS Server H350 V2 Service Manual page 10

Document conventions
NOTE:
The Note: indicator highlights important messages and additional information.
WARNING:
A warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the equipment
safely, always pay attention to these warnings.
CAUTION:
A caution concerning operations that may lead to injury to persons if not performed correctly. To use the equipment safely,
always pay attention to these cautions.
IMPORTANT:
Operational requirements and restrictions. Be sure to read these items carefully to operate the equipment correctly, and
avoid damage to the equipment or property.
How the imagePRESS Server operates
When a customer prints, the motherboard and printer interface board process image data. The printer interface board is a custom
board and allows the imagePRESS Server to communicate with the printer. The CPU controls the transfer of image data to and
from the motherboard and runs the PostScript interpreter. DIMM holds image data during printing.
The interpreter rasterizes the page description file and compresses the image pattern into memory using compression technology.
The interpreter outputs the compressed raster data through the image frame buffer memory to the printer interface board. The
raster data is sent to the printer, which then renders the image on paper at maximum speed.
Before you service the imagePRESS Server
Before you service the imagePRESS Server, it is strongly recommended that you make sure that you have the required tools
(see "Tools you will need" on page
Also, keep in mind that the most common cause of a hardware problem is a faulty or loose connection. Before you replace an
expensive component, check internal and external connections (see
Tools you will need
To install or service the imagePRESS Server, you will need the following tools and parts:
• ESD wrist grounding strap and antistatic mat
• Flathead screwdriver
• #0, #1, and #2 Phillips head screwdrivers
When servicing the Fiery QuickTouch, use a screwdriver with a magnetic tip.
• Needlenose pliers
• imagePRESS Server documentation, including the customer media pack and any related service bulletins
IMPORTANT:
Avoid touching magnetic tools to storage media such as hard disk drives. Contact between magnetic tools and magnetic
storage media may result in data corruption.
Precautions
This section includes information about how to safely operate and service the imagePRESS Server and how to avoid damage to
imagePRESS Server components.
3) and carefully review all precautions (see "Precautions " on page
"imagePRESS Server hardware" on page
3
1. Introduction
3)
29)