Canon ImagePRESS Server H350 V2 Service Manual page 113

3. Select [Tools] > [Setup].
4. Check the settings of server, network, printer and
PDL, and press [Save Changes] even if there is no
change.
At that time, the setting will not be completed unless
[Save Changes] is pressed.
Example : Select [Server] > [General].
2
1
Check that the items in the General Setup are set, and
perform [Save Changes] even if there is no change.
The setting will not be completed unless [Save Changes]
is pressed.
5. Press [Exit Setup] after all settings are completed.
6. The confirmation screen will appear, and then press
[Reboot Now].
7. The imagePRESS Server will be restarted (approx.
10 min.).
■ Checking the Operation After
Making the Settings
Output Test Page and Configuration by the following
procedure, and check the connection between the host
machine and this equipment as well as the settings of this
equipment.
106
8. INSTALLATION PROCEDURE