Canon ImagePRESS Server H350 V2 Service Manual page 110

4.
Cross Ethernet
Cable (3.0 m)
5.
1x
1x
6.
NOTE:
Install with the Power Supply Cord, which will be sent
separately.
1x
7.
CAUTION:
Be sure to use the network cable with Category 5e or
higher. In addition, a shielded type (STP cable) is
recommended.
When using the non-shielded type (UTP cable), it may
influence the surrounding electronic equipments via
network cable.
1x
8.
Connect the power plug to the outlet of the host
machine.
103
8. INSTALLATION PROCEDURE
Straight Ethernet
Cable (3.0 m)
(for network connection)