Redx RX Series User Manual page 36

Hide thumbs Also See for RX Series:
Table of Contents

Advertisement

B.Off - Grid / EPS Functionality
When the power grid is cut off, the system will automatically switch to off-grid mode. The system
will supply power to the EPS loads through the battery. Note: under off-grid mode, the system power
output rate only using the battery is 5kW. The load power rate of the EPS end should not exceed 5kW.
When the system detects a low battery status, the battery will stop discharging automatically and the
battery will be charged when there is solar or other power supply available.
6.3.2 Fault State
The RX-5000AC has a smart control system that continuously monitors and regulates system status.
When there is a system fault or equipment fault, fault information will be displayed on the web page /APP,
and the LED light will also be on in fault mode.
Notes:
(A) For details about fault information, see Chapter 8.
(B) Part of the fault information is used to remind users of possible internal fault of the system
6.3.3 Firmware Update
When the system is upgrading firmware, do not power off. When the upgrade is complete, the system
will automatically switch to normal working mode.
6.3.4 Self-check Status
Before entering normal operation mode, RX-5000AC will enter self-check mode. If all checks pass
succesfully, the system will return to normal working mode; otherwise, the system goes into the fault
state.
6.3.5 Standby Status
When the system does not fault but certain operating conditions are not met, the system will turn to
standby mode.
6.3.6 Protection Mode
Connecting an oversize load to the EPS terminal will trip the unit and trigger protection mode. The unit
will try to restart 3 times, if the load is still present, the unit will revert to protection mode. Remove the
oversize load and restart the unit. If any circuit breakers have tripped – contact your installation partner.
6.3.7 Shutdown Status
Disconnect all power supply, turn everything off and the system will automatically enter the Off state.
The specific steps are as follows:
Rev 20230602
RX - 5000AC
Page 31 of 40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-5000ac

Table of Contents