Failure to comply with any of the above requirements may result in injury to personnel or damage to equipment. Redx shall not be liable for any loss of life or damage caused by failure to comply with the requirements of this document and user manual.
② urn on the inverter power button Step③ : Turn on the battery isolation circuit breakers Step④ : Open the Redx Power Redx App, login to your installer account ® Step : Complete all installation steps in the App instructions...
Installation Avoid water and electricity when drilling, bit size φ8mm, drilling depth 40mm. Expansion Bolts Hole Template Inverter 2.8 N.M Plug Spacer Bracket Battery Bracket Screw Plug Refer to the electrical connection section for wiring 5 N.M 1.2 N.M PROJ. NO. : MODEL NO.
Page 7
Battery Power Cable Wiring Note: You will hear a ‘Click’ sound when the battery connector is fully connected. When removing a battery cable, press the button on the cable terminal. Click Note: An external DC Isolator is required when connecting the batteries to the inverter (2 pole 125A DC - Supplied).
Communication Connection Group Group Definition Dry contact 1 public DRM0- Dry contact 1 open DRM0+ Dry contact 1 close Dry contact 2 public 485C- Dry contact 2 open 485C+ Dry contact 2 close Negative Input For Switch Positive Input For Switch 485D+ 485D- Reserved...
Page 9
EPS Load Connection Bootlace Ferrule-6012 Tighten latchscrew once connector is in.
CT / Meter Installation L-Line Grid CT GRID ① RX-5000AC The CT with the "Grid" label is attached to the L line of the grid ① cable. The "Grid" CT arrow points RX-5000AC towards the ② Grid power grid. The "PV"...
Page 11
Redx App Download Redx.com.au Downloads Redx Power App Installer Manual 5000AC User Manual 5000AC Quick Installation Guide 5000AC Warranty Card Redx Power App User Manual RX-0050 User Manual The size and parameters of the product are subject to change without notice.