Related Manuals for ProLights Solar 27Q
Summary of Contents for ProLights Solar 27Q
- Page 1 Solar 27Q 27x10W high brightness indoor/outdoor compact wash light USER MANUAL English version REV.01-12/23...
- Page 2 PROLIGHTS product are trademarks OWNED or licensed by Music & Lights S.r.l., its affiliates, and subsidiaries. PROLIGHTS is a registered trademark by Music & Lights S.r.l. All right reserved. Music & Lights – Via A. Olivetti, snc - 04026 - Minturno (LT) ITALY.
-
Page 3: Table Of Contents
LIGHT DIFFUSION FILTER (CODE S27QFILTER 40 - 60 - 1060 - 3060) ......20 BARN DOOR (CODE S27QBD - OPTIONAL) ..............21 13 - MAINTENANCE MAINTENANCE AND CLEANING THE PRODUCT............22 VISUAL CHECK OF PRODUCT HOUSING ..............22 TROUBLESHOOTING ..................... 23 PROLIGHTS - Solar 27Q... -
Page 4: Safety Information
• Do not reapply power until repairs have been completed. • Refer any service operation not described in this manual to PROLIGHTS Service team or an authorized PROLIGHTS service center. Installation •... - Page 5 • Warning! Disconnect the fixture from AC mains power and allow to cool for at least 10 minutes before handling. • Only technicians who are authorized by PROLIGHTS or Authorised service partners are permitted to open the fixture. • Users may carry out external cleaning, following the warnings and instructions pro- vided, but any service operation not described in this manual must be referred to a qualified service technician.
- Page 6 • 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD); • 2014/30/EU - Electromagnetic Compatibility (EMC); • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS); • 2014/53/EU - Radio Equipment Directive (RED). Other approvals PROLIGHTS - Solar 27Q...
-
Page 7: Packaging
• UPBOX1UP5: Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT; • UPBOXPRO: Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector. 2 - TECHNICAL DRAWING Fig. 01 Weight: 9 kg - 4.08 lbs PROLIGHTS - Solar 27Q... -
Page 8: Installation
Do not use any type of clamp that does not completely encircle the structure when fastened. RSR0630A/B CLAMP Steel security RSR0630A/B C6002B cable Steel security cable OS25 - OMEGA QUICK-LOCK 140 [5.5] Fig. 02 PROLIGHTS - Solar 27Q... -
Page 9: Product Overview
6. DMX OUT (5-p XLR): 1 = GND, 2 = sign-, 3 = sign+, 4 N/C, 5 N/C. 7. POWER OUT: power output for connection of multiple units in series. 8. SAFETY EYES to attach safety cable. 9. HOLE for Omega Quick-Lock barcket. Fig. 03 PROLIGHTS - Solar 27Q... -
Page 10: Connection To The Mains Supply
• Connect the power connector into the Mains input socket (100-240 VAC-50/60 Hz). • The product is then ready for its operations and can be controlled through the available input sig- nals on board. • To disconnect power from the product, disconnect the Mains from the socket. PROLIGHTS - Solar 27Q... -
Page 11: Dmx Connection
... . DMX IN DMX OUT DMX IN DMX OUT DMX IN DMX OUT DMX IN DMX OUT DMX OUT DMX512 Controller Fig. 05 - Example 10 DMX channels configuration PROLIGHTS - Solar 27Q... -
Page 12: Construction Of The Dmx Termination
• The transmitter scans for all unlinked receivers for a period of about 5 seconds. • If the connection fails, check the position of the receiver. • The wireless icon on the receiver display indicates the received signal strength. PROLIGHTS - Solar 27Q... -
Page 13: In To Wdmx
• The wireless icon on the receiver display indicates the received signal strength. WDMX TO DMX (RX) This function enable or disable the retransmission of the wireless DMX signal received throught the DMX port on the receiver side. PROLIGHTS - Solar 27Q... -
Page 14: Control Panel
• Navigates downwards through the menu list and increases the nu- Down meric value when in a function • Navigates upwards through the menu list and decreases the numeric Down value when in a function PROLIGHTS - Solar 27Q... -
Page 15: Menu Structure
MODE to simulate different dimming curves. DIMMER 1 DIMMER 2 DIMMER 3 WHITE BALANCE ADJUST VALUE (125-255) GREEN VALUE (125-255) BLUE VALUE (125-255) WHITE VALUE (125-255) 600Hz Select PWM frequency. FREQUENCY 1200Hz 2000Hz 4000Hz 6000Hz 25kHz PROLIGHTS - Solar 27Q... - Page 16 Set the successive units to be slave. EFFECTS EFFECT1 SPEED (1-100) ..EFFECT9 STATIC FIXED COLOR RGBW MANUAL VALUE (000-512) COLOR GREEN VALUE (000-512) BLUE VALUE (000-512) WHITE VALUE (000-512) PROLIGHTS - Solar 27Q...
-
Page 17: Rdm Functions
The PIDs in the following tables are supported in the product. Parameter DMX_PERSONALITY 0x00e0 DMX_PERSONALITY_DESCRIPTION 0x00e1 CURVE 0x0343 MODULATION_FREQUENCY 0x0347 IDENTIFY_DEVICE 0x1000 FACTORY_DEFAULTS 0x0090 WBANLANCE_R 0x8200 WBANLANCE_G 0x8201 WBANLANCE_B 0x8202 WBANLANCE_W 0x8203 PROLIGHTS - Solar 27Q... -
Page 18: Dmx Charts
WHITE 1 EFFECTS SPEED RED 3 RED 2 DIMMER SPEED GREEN 3 GREEN 2 MODE BLUE 3 BLUE 2 WHITE 3 WHITE 2 DIMMER SPEED RED 3 MODE GREEN 3 BLUE 3 WHITE 3 DIMMER SPEED MODE PROLIGHTS - Solar 27Q... - Page 19 Effect 1 011-037 Effect 2 038-064 Effect 3 065-091 Effect4 092-118 Effect5 (Effects1- 4) 119-145 Effect 6 146-172 Effect 7 173-199 Effect 8 200-226 Effect 9 (Effects6- 8) 227-255 EFFECTS SPEED Effects speed slow to fast 000-255 PROLIGHTS - Solar 27Q...
- Page 20 000 - 051 Dimmer speed mode off 052 - 101 Dimmer speed mode 1 (fast speed) 102 - 152 Dimmer speed mode 2 (middle speed) 153 - 203 Dimmer speed mode 3 (slow speed) 204 - 255 PROLIGHTS - Solar 27Q...
-
Page 21: Accessories Installation
2. Replace the lenses by inserting the two pins on the back of the lens (DETAIL) with the holes pro- vided on the PCB LED (5). NOTE: to reassemble the lenses, reverse the procedure. NOTE: it is recommended to tighten the front cover screws carefully so as to guarantee the correct IP degree. Fig. 09 PROLIGHTS - Solar 27Q... -
Page 22: Light Diffusion Filter (Code S27Qfilter 40 - 60 - 1060 - 3060)
(3). Place the light diffusion filter (4) on the lenses (5). NOTE: to remove the light diffusion filter, reverse the procedure. NOTE: it is recommended to tighten the front cover screws carefully so as to guarantee the correct IP degree. Fig. 10 PROLIGHTS - Solar 27Q... -
Page 23: Barn Door (Code S27Qbd - Optional)
Insert the two marked pin on down edge of the barn door into the holes provided on the unit (1) and positioning the spring pin on the hardware into the hole provided on the top (2). Hook the safety cable (3) and adjust the angle of the four leafs (4). Fig. 11 PROLIGHTS - Solar 27Q... -
Page 24: Maintenance
• This checking is necessary for both fixed installations and preparing product for renting. Any free moving parts inside of the product, cracked cover/housing or any part of front glass not sitting properly in place need to be immediately replaced. PROLIGHTS - Solar 27Q... -
Page 25: Troubleshooting
• Dirty or damaged filters. • Install lens assembly properly. Contact an authorized service center in case of technical problems or not reported in the table can not be resolved by the procedure given in the table. PROLIGHTS - Solar 27Q... - Page 26 Note...
- Page 27 Note...
- Page 28 Note...
- Page 29 Note...
- Page 30 Note...
- Page 32 PROLIGHTS is a trademark of prolights.it Via A.Olivetti snc MUSIC & LIGHTS S.r.l. support@prolights.it 04026 - Minturno (LT) ITALY musiclights.it Tel: +39 0771 72190...
Need help?
Do you have a question about the Solar 27Q and is the answer not in the manual?
Questions and answers