Led Indicators - Supermicro SuperServer SYS-211TP-HPTR User Manual

4.5 LED Indicators

BMC Heartbeat LED
LEDM1 is the BMC heartbeat LED. When the LED is blinking green, BMC is functioning
normally. Refer to the table below for the LED status.
Note: For information on UID LED Indicators and BMC Heartbeat LED Indicator, refer to the
section on UID LED/BMC Reset Switch and LED
Onboard Power LED
The Onboard Power LED is located at LEDPWR on the motherboard. When this LED is on,
the system power is on. Be sure to turn off the system power and unplug the power cord
before removing or installing components. Refer to the table below for more information.
M.2 LED
The M.2 LEDs are located at M2_1_LED1 and M2_2_LED1 on the motherboard. M2_1_LED1
is for M.2-C1 and M2_2_LED1 is for M.2-C2. When they are blinking, the M.2 devices are
working. Refer to the table below for more information
BMC Heartbeat LED Indicator
LED Color
Blinking Green
Onboard Power LED Indicator
LED Color Definition
Off System Power Off (power cable not connected)
Green System Power On
M.2 LED State
LED Color
Green: Blinking
73
Chapter 4: Motherboard Connections
Definition
BMC Normal
Indicator.
Definition
Device is working