System Features; Front View; Drive Carrier Indicators - Supermicro SuperServer SYS-211TP-HPTR User Manual

1.2 System Features

The following views of the system display the main features. Refer to
specifications.

Front View

Node A
A0 A1 A2 A3 A4
Item Description
0 - 5 Six hot-swap 2.5" SATA3 drive bays (each node)

Drive Carrier Indicators

Each drive carrier has two LED indicators: an activity indicator and a status indicator. For RAID
configurations using a controller, the meaning of the status indicator is described in the table
below. For OS RAID or non-RAID configurations, some LED indications are not supported,
such as hot spare. For VROC configurations, refer to the VROC section in this manual.
Color
Blue
Activity LED
Blue
Off
Red
Red
Red
Status LED
Red
Red
Node B
A5 B0 B1 B2 B3 B4 B5
Figure 1-1. Front View
Logical Storage Drive Numbers
Drive Carrier LED Indicators
Blinking Pattern
Solid On
Blinking
Solid On
Blinking at 1 Hz
Blinking at 4 Hz
Blinking with two blinks and
one stop at 1 Hz
On for five seconds, then off
11
Node C
C0 C1 C2 C3 C4 C5 D0
Behavior for Device
Idle drive installed
I/O activity
Idle SATA or no drive
Failure of drive with RSTe support
Rebuild drive with RSTe support
Identify drive with RSTe support
Hot spare for drive with RSTe support
Power on for drive with RSTe support
Chapter 1: Introduction
Appendix C for additional
Node D
D1 D2 D3 D4 D5