3.5
Material shaft, hinged
To close the gap between the auger box
and the screed's side board, hinged ma-
terial shafts can be mounted on both
sides of the auger.
The hinged material shafts swivel up due
A
to the material pressure which is exerted
and swivel in due to screed retraction.
- Mount the left/right material shafts on
the auger box with the relevant as-
sembly parts (1).
If a terminal bearing is mounted for the ex-
A
isting auger width, the adapter plate (2)
also has to be fitted.
- Fit the plate (3) to the hinge (5) using
the hinge rod (4).
The hinged material shaft can be se-
A
cured with the assembly parts (6) in
swivelled in position when transporting
the machine in its basic width.
The assembly parts (6) can be kept at
A
the hole (7).
2
1
7
4
5
3
6
E 11 29