Table of Contents
Advertisement
1.3
Preparations for paving
Separator fluid
Spray the parts coming into contact with
asphalt (hopper, screed, auger, push
roller) with a separator fluid.
m
Do not use diesel fuel as it dissolves the
bitumen (prohibited in Germany!).
Screed heater system
Switch on the screed heater approx. 15–30 minutes (depending on the ambient tem-
perature) before paving begins. Warming up prevents the material from sticking to the
screed plates.
D 41 20
F0147_A1.TIF
Advertisement
Table of Contents
