Table of Contents
Advertisement
3
Securing the load
The following instructions for securing the load on the low-bed trailer consist merely
A
in examples of how to secure the load correctly.
Always comply with the local regulations for securing the load and for correct use of
A
load securing equipment.
Normal driving mode also includes emergency braking, evasive manoeuvres and
A
poor road surfaces.
Use should be made of the different methods available for securing loads (positive
A
fit, force connection, diagonal lashing, etc.) in accordance with the specific
transport vehicle.
m
The low-loader must have the necessary number of lashing points with a lashing
strength of LC 4,000 daN.
m
The total height and total width must not exceed the maximum permissible dimensions.
m
The ends of lashing chains and straps must be secured to prevent them working
loose and falling down unintentionally!
3.1
Prepare the low loader
The floor of the loading space must always be undamaged, free of oil and mud, dry
m
(residual moisture is permitted without accumulations of water) and swept clean!
C 11 4
Advertisement
Table of Contents
