Controls; Operating Panel - Fayat Group DYNAPAC SD2550C Operating Instructions Manual

2

Controls

2.1

Operating panel

All detent switch functions which may pose a risk on starting the diesel engine (auger
A
and conveyor conveying function) are set to the STOP function in the case of EMER-
GENCY STOP or restarting the control system. If settings are changed when the die-
sel engine is stopped ("AUTO" or "MANUAL"), these are reset to "STOP" on starting
the diesel engine.
The "Turning on the spot" function is reset to "Straight-ahead travel".
D 11 3