Table of Contents
Advertisement
2.2
Mechanical adjustment
with ratchet (o)
- Set the ratchet direction lever (1) to the
clockwise or anti-clockwise direction.
Turning anti-clockwise lowers the au-
ger, turning clockwise lifts the auger.
- Set the desired height by alternately
adjusting the right-hand and the left-
hand side.
- The current height can be read at the
scale (2).
2.3
Hydraulic adjustment (o)
- Determine the currently set height of
the auger crossbeam - left and right on
the scale (2).
m
Actuate both of the corresponding func-
tion buttons on the operating panel
evenly to prevent the auger crossbeam
from jamming.
- Check whether the heights on the left
and on the right are identical.
1
2
E 11 3
Advertisement
Table of Contents
