Table of Contents
Advertisement
Adjusting the pressure
Pressure adjustments can only be made while the diesel engine is running.
Therefore:
- Start the diesel engine and set the traction controller (15) to zero (precaution
against inadvertent advancing).
- Activate the "floating position" using switch (70).
For screed charging/relieving:
- Set the drive lever (13) to the centre
position.
- Activate
function (73) or the screen charging
function (74) (LED ON).
- Set the pressure using pressure regu-
lating valve (A) ; read it off at the ma-
nometer (B).
When screed charging/relieving is nec-
A
essary and automatic levelling is used
(grade control and/or slope control), the
compacting performance changes (layer
thickness).
The pressure can also be set or corrected during paving.
A
(max.
50
bar)
Setting pressure for screed control with paving stop + relieving:
- Set the drive lever (13) to the centre position.
- Activate the "floating position" (70) function (LED ON).
- Set
the
at the manometer (A).
(Basic setting: 20 bar)
the
screed
relieving
pressure
using
pressure
A
B
C
regulating
valve
(C);
read
it
off
D 41 33
Advertisement
Table of Contents
