Jungheinrich ETM 110 Operating Instructions Manual page 60

Electrical 7.1
system:
7.2
7.3
7.4
7.5
7.6
7.7
Electric 8.1
motors
8.2
8.3
Battery: 9.1
9.2
9.3
9.4
9.5
Hoist frame: 10.1 Check the mast anchorage
10.2 Check lifting chains and chain guides for wear, adjust and
10.3 Check support and attachment of tilt cylinder
10.4 Check the tilt angle of mast
10.5 Perform sight check of rollers, sliding elements, and stops
10.6 Check hoist frame bearing
10.7 Check the traversing systems for wear and damage, adjust la-
10.8 Check fork tines and fork carrier for wear and damage
Mounted 11.1 Performance check
implement:
11.2 Check the attachment to the vehicle and all load bearing ele-
11.3 Check bearings, guide elements, and stops for wear and da-
General mea- 12.1 Check the electrical system for a grounding fault
surements:
12.2 Check the driving speed and braking distance
12.3 Check the lifting and lowering speed
12.4 Check safety and shutdown devices
Lubrication: 13.1 Grease the vehicle in accordance with the lubrication schedule
Demonstrati- 14.1 Perform a trial run under nominal load
on:
14.2 Upon completion of servicing operations, demonstrate the ve-
Performance check
Check all cables for secure connection and damage
Check the fuses for correct amperage
Check switches and trip cams for secure attachment and cor-
rect functioning
Check the warning installation for correct functioning
Check contactors, replace wearing parts, if necessary
Check the electronic boards for tight seat and cleanliness
Check the carbon brushes for wear
Check the motor for secure attachment
Clean motor housing by means of a vacuum cleaner and check
the commutator for wear
Check the battery cables for damage, renew, if necessary
Check battery trolley locking, performance and adjustment
Check acid density, acid level and cell voltage
Check the terminals for secure attachment and apply grease
Clean battery connections, check for tight seat
grease
teral play, if necessary
ments
mage, grease
hicle to the person responsible
Maintenance intervals
standard = t W M M M
cold store = k 1
k t
k t
k t
k t
k t
k t
k t
k t
k t
k t
k t
3 6 12
t
t
t
t
t
t
t
t
k t
t
t
t
t
t
t
t
t
t
t
t
t
t
F 5