Advertisement
F. How to call into the system
G. How to use the 4-digit access code to
open the door
H. How to increase or decrease the display's
intensity
I.
How to increase or decrease the
speaker's volume
J. How to check the total tenant's directory
in the system
K. How to check my system model number
AeGIS 7000V
2. Warning beep will be heard 10 minutes
before the talk time expired.
3. Press # to extend the talk time
You must know the system's phone number
1. Call the system's phone number
2. The system will answer between 2
rings, then
BEEP BEEP!
3. Press
to establish communication
4. Press 9 to release the door.
1. Press
, the welcome screen will stop
scrolling otherwise repeat this step.
2. Press 4-digit valid access code.
WARNING: SYSTEM WILL BE
DISABLED FOR 90 SECONDS IF INVALID
ACCESS CODE HAS BEEN ENTERED
ACCORDING TO THE SETTING OF LOCK-OUT
COUNT (FUNCTION CODE 72, p19)
1. Locate the display intensity adjustment see
figure 2.1, p11
2. Turn
counter clockwise to increase or
clockwise to decrease
1. Locate the speaker's volume adjustment see
figure 2.1, p11
2. Turn
counter-clockwise to increase or
clockwise to decrease
Use Function code 91, see chapter 3, p20
Use Function code 46, see chapter 3, p18
nd
th
- 4
will be heard
Page 22
Advertisement
