Advertisement
Default is 60 seconds
DOOR OPEN TIME
04-99 Seconds
Default is 12 seconds
LOCK OUT COUNT
1-9 Times
Default is 3 times
WARNING: SYSTEM WILL BE DISABLED
FOR 90 SECONDS IF INVALID ACCESS CODE HAS
BEEN ENTERED ACCORDING TO THE SETTING OF
LOCK-OUT COUNT.
TONE OR PULSE
Not Applicable
AUTO ANSWER
1= enable
0= disable
Default is 1 (enable)
The system will answer incoming call between 2
th
4
ring. Press * to establish two ways communication
with the person at the system
KEYPAD BEEP OFF
1= enable (beep on)
0= disable (beep off)
Default is 1 (enable)
OPENNING DOOR BEEP OFF
1= enable (beep on)
AeGIS 7000V
71
72
73
74
75
76
1. Enter function code 70 then press #
TALK TIME:060
2. Press 010-180 then press #
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 13
1. Enter function code 71 then press #
DOOR OPEN:12
2. Press 04-99 then press #
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 13
1. Enter function code 72 then press #
LOCK-OUT CNT:3
2. Press 1-9 then press #
Not applicable
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 13
1. Enter function code 74, then press #
AUTO ANSWER=1:1
nd
-
2. Press 1= enable or 0= disable then press #
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 13
1. Enter function code 75 then press #
BEEP On=1Off=0:1
2. Press 1= enable or 0= disable then press #
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 13
Page 19
Advertisement
