Advertisement
NOTE: DIRECTORY MUST BE UNIQUE FOR
EACH TENANT OTHERWISE THE DISPLAY
WILL SHOW
DIR # is used !
WARNING: IF THE DIRECTORY IS
USED TO PROGRAM THE 4-DIGIT ACCESS
CODE OR TELEPHONE NUMBER
NAME, THEN YOU MUST KNOW THE
DIRECTORY CODE TO DELETE THE 4-DIGIT
ACCESS CODE OR PHONE NUMBER. IF THE
DIRECTORY IS FORGOTTEN, YOU MUST
ERASE THE SYSTEM TO FACTORY DEFAULT.
EDITING TENANT DIRECTORY
NOTE: PRESS # TO KEEP EXISTING
INFORMATION
NOTE: IF DIRECTORY DOES NOT EXIST, THE
DISPLAY WILL SHOW
DIR not exist !
AeGIS 7000V
WITHOUT
02
Enter the Name
_ _ _ _ _ _ _ _ _ _ _ _ _
3. Enter the person name up to 16-characters.
Press # after entering each letter, see
(Keypad Function and Layout page 14).
Press ## after entering last letter. The screen
will show
PH#:_ _ _ _ _ _ _ _ _ _ _
4. Enter telephone number up to 11 digit, then
press #,
Access Code:_ _ _ _
5. Enter 4-digit access code then press #.
Repeat step 1 to program another tenant.
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 13
1. Enter function code 02 then press #
Enter Dir: _ _ _
2. Enter 2, 3 or 4 digit directory to be edited
Enter the Name
_ _ _ _ _ _ _ _ _ _ _ _ _
3. Enter the person name up to 16-digit. Press #
after entering each letter see ( Keypad
Function and Layout page 14). Press ##
after entering last letter. The screen will show
PH#:_ _ _ _ _ _ _ _ _ _ _
4. Enter telephone number up to 11 digit, then
press #,
Access Code:_ _ _ _
Page 15
Advertisement
