Table of Contents
Advertisement
Before using for the first time
The range may only be operated
after it has been installed properly.
Read the operating and installation
instructions carefully before installing
the range..
Read the operating instructions care-
fully before starting up the range.
The time of day can only be changed
when the mode selector is set to Off.
Set the time of day.
Setting the time of day for the
first time
The time of day is shown in 12 hour
clock format.
After connection the oven to the electri-
cal supply will appear in the dis-
play and a will flash under :
Use or to set the time of day.
Confirm with OK.
The time of day is now saved.
Change the time of day to a 12-hour
format by setting h in the settings
menu (see "Settings").
During a power failure, the time of day
will be saved for approx. 200 hours. If
the power returns within this period of
time the current time of day is dis-
played again. If the power is out for an
extended period of time the time of
day will need to be reset.
The time is day is turned off by default
(see "Settings - ").
The display will appear dark when the
oven is turned off. The time of day
continues to run unseen in the back-
ground.
Heating the oven
New ovens may have a slight odor dur-
ing their first use. Heating up the oven
for at least an hour with nothing in it will
eliminate the odor.
Ensure that the kitchen is well venti-
lated while the appliance is being
heated up for the first time.
Close doors to other rooms to pre-
vent the smell spreading throughout
the house.
Remove any protective wrapping and
sticky labels from the oven.
Take all accessories out of the oven
and clean them (see "Cleaning and
care").
Before heating the oven up, wipe the
interior with a damp cloth to remove
any dust or bits of packaging that
may have accumulated in the oven
cavity during storage and unpacking.
Before first use
33
Advertisement
Table of Contents
