Download Print this page

Advertisement

Installation Instructions

Advertisement

   Also See for Miele H 6560 B

   Summary of Contents for Miele H 6560 B

  • Page 1

    Installation Instructions...

  • Page 2

    – 120/208 V, 20 A, 60 Hz Installation, repair and maintenance work must be performed by a Miele – 120/240 V, 20 A, 60 Hz authorized service technician. Work The voltage can be adjusted (see...

  • Page 3: Installation Diagrams

    Installation diagrams Appliance and cut-out dimensions Miele ovens can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer. Undercounter installation 21 5/8" 23 5/8" ( 550 mm) (600 mm) 7/8" 16" (22*/23** mm) (407 mm) 4"...

  • Page 4

    Cut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power cord and ventilation Power cord with plug Oven with glass front Oven with metal front Front design may vary depending on model. For the more current specifications please visit the Miele website.

  • Page 5

    Installation diagrams Front dimensions 4 3/8" (111 mm) 23 7/16" (596 mm) 22 5/8" 23 5/16" (575 mm) (592 mm) 18 5/8" (473 mm) 3/16" (4 mm) - 1/16" (-2 mm) H65xx: 2.75" (69 mm) Oven with glass front: .08" (2.2 mm) Oven with metal front: .05"...

  • Page 6: Installing The Oven

    Installing the oven Installing the oven The oven must not be operated Connect the power cord to the until it has been properly installed electrical supply. within cabinetry. Do not carry the oven by the door In order for the oven to function handle.

  • Page 7

    Installing the oven Reinstall the door, if necessary (see "Cleaning and care - Installing the door").

  • Page 10

    Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive 800-843-7231 Vaughan, ON L4K 4V8 Phone: 609-419-9898 www.miele.ca Fax:...

  • Page 11

    H6560B  en – US, CA M.-Nr. 09 786 780 / 01...

Comments to this Manuals

Symbols: 0
Latest comments: