Problem
flashes in the dis-
play.
appears unex-
pectedly in this
display and the
symbol
flashes at the
same time. The
signal may also
be sounding.
appears in the
display.
appears in the
display.
appears in the dis-
play.
A noise is heard after
the cooking process is
complete.
The oven has turned it-
self off.
The oven lighting turns
off after a short time.
Frequently Asked Questions
Possible cause and solution
There has been a power failure.
Reset the time of day (see "Using for the first
time").
Cooking times will also need to be reset.
The oven has been operating for an unusually long
period of time, this has activated the "Safety switch-
off feature".
Turn the mode selector to OFF. The oven is now
ready to use.
The Self Clean program door lock is not locking.
Turn the mode selector to the Self Clean program
again.
If the problem persists, contact Miele Technical
Service.
The door lock for the Self Clean program will not de-
activate.
Turn the mode selector to the Off position and turn
the oven off.
If the problem persists, contact Miele Technical
Service.
A fault has occurred that you cannot resolve.
Contact Miele Technical Service.
After the cooking process the cooling fan will con-
tinue to run for a while after a program is complete to
prevent moisture from building up in the oven, on the
control panel or surrounding cabinetry.
The cooling fan will turn off automatically.
The oven turns off automatically if a button is not
pressed after a certain amount of time or after a
cooking program has ended to save power.
Turn the oven back on.
The oven is factory set to turn off automatically after
15 seconds. This setting can be changed (see "Set-
tings overview – ").
73