Ibc Boiler Controller; General; Control - IBC SL 28-160 Installation And Operating Instructions Manual

2.0 IBC BOILER CONTROLLER

WARNING
No sharp or metallic object
should be used on the touch
screen as this will cause
damage. Use only a Stylus or a
clean finger."
BOILER SYSTEMS AND OPERATION
SL 28-160 MODULATING GAS BOILER
2.1

GENERAL

This boiler is equipped with the V-10 Touch Screen controller. The controller
simplifies the programing of the boiler while providing greater flexibility. For more
detailed instructions, reference the Touch Screen Boiler Controller Manual.
The controller is equipped to provide:
•
Control of up to 5 pumps – 1 boiler pump + 4 separate load pumps
•
Outdoor Reset control
•
Set Point temperature regulation
•
Domestic Hot Water (DHW)
•
External control via 0-10VDC or 4-20mA signaling
•
Alarm dry contacts
•
Load Combining – simultaneous operation of 2 similar water temperature
loads
•
The control can manage and/or operate in a network of up to 24 IBC VFC or
SL boilers
Some of the new features available in the touch screen control include:
•
Express Setup Menu for simple, quick programing
•
Software updatable in the field with a SD card or a USB stick
•
Setup configuration back-up and cloning using SD card or USB stick
•
Superior warning messages while setting up the control
•
Advanced Error messages with visual display on the Home Screen
•
Internet/LAN connectivity
•
BACnet (with activation)
2.2

CONTROL

When the boiler is first energized, the controller will go through a power up
sequence that will take approximately 90 seconds. During this time the controller
is completing a self-diagnostic and loading all previous settings. In the event of
a power interruption the boiler will automatically resume operation when power
is restored with all the previously stored values. The controller provides overall
management of the boiler operations including;
•
Power-up, Self-diagnostics, easy Load parameter adjustments
•
Burner operation, safety management systems, Call for Heat management
and Load Priority
•
Real time boiler data
•
Temperature and throttle operation
•
Maintenance of operational and error service logs
•
2-way communication between other IBC boilers and controls
2-1