HTX30 Product Manual
External control interface module
The external control interface module can be mounted in any convenient location but note the following:
Must be connected to the SCP connector at the last station control panel in the chain.
The length of the Devicenet MicroC connector cable is 2 meters.
A
Control Station 1
B
Control Station 2
SCP
Station control panel
CID
Control input device
XCI
External control interface module
The following layout applies if an optional JETanchor control module is installed as well as an external control
interface module.
Figure 13: External control interface module
Blk
Black connector
Grn
Green connector
Wht
White connector
Yel
Yellow connector
4-11
Component Installation