Component Installation
1
To port jet power supplies and jet sensors
2
To starboard jet power supplies and jet sensors
3
CAN Bus terminators fitted to last SCP or module in the chain
4
To third station control panel, external control interface or JETanchor module
if fitted. If not fitted, connect the CAN Bus terminator (3).
Figure 7: Twin jet interconnecting cabling
4-6
HTX30 Product Manual
CIDs
Control input devices
SCP
Station control panel
EIMp
Engine interface module (port)
JIMp
Jet interface module (port)
EIMs
Engine interface module (starboard)
JIMs
Jet interface module (starboard)