Barco G50 Installation Manual page 54

Hide thumbs Also See for G50:
Table of Contents

Advertisement

Adjusting the projected image
1
Fixed ring
2
Floating ring
Manual adjust the floating ring before adjust Zoom & Focus for better optical performance.
Scale on floating ring shows the projection distance.
The projection distance is from projector lens to screen.
Example:
When the distance between screen and projector lens is 1.4 meter, adjust floating ring scale to "1.40" to have
better performance.
Special Boresight tools required for G lens (0.65 - 0.75 : 1)
lens.
Boresight extenders (with red rubber ring), 3 pieces.
Boresight L shape socket tool.
Adjust Boresight
1.
Is this a lens with an floating ring? E.g., G lens (0.65 - 0.75 : 1)
If yes, install the 3 Boresight extenders on the screws ① , ② and ③.
2.
If zone C is in focus on the screen, please check the focal plane of zone A.
If clear position is just on the screen→ No need to adjust.
If clear position is out of the screen(close to projector), rotate screw ① CCW and then screw ②&③ CW
for half amount that① rotated. → repeat until both A and C are clear. (e.g. turning ① CCW in a circle,
then turn ②&③ CW in half circle).
If clear position is in the screen(far from projector), rotate screw ① CW and then screw ②&③ CCW for
half amount that① rotated. → repeat until both A and C are clear.
Image 5–7
Note: This process may cause the other areas of the image to slide out of focus. This is totally
normal.
3.
If zone D is in focus on the screen, please check the focal plane of zone E.
If clear position is just on the screen→ No need to adjust.
If clear position is out of the screen(cloe to projector), rotate screw ② CCW and then screw ① &③ CW
for half amount that ② rotated. → repeat until both D and E are clear. (e.g. turning ② CCW in a circle,
then turn ① &③ CW in half circle)
If clear position is in the screen(far from projector), rotate screw ② CW and then screw ① &③ CCW for
half amount that ② rotated. → repeat until both D and E are clear.
54
R5916677 /00
G50
3
. Tools are included in the box of the
3
.
3
1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

G50-w8G50-w6

Table of Contents