Installing The Expansion Card - Dell OptiPlex 3010 Small Form Factor Owner's Manual

5. Pull the release lever away from the PCIe x16 card until you release the securing tab from the dent in the card.
Then, ease the card up and out of its connector and remove it from the computer.
6. Pull the release lever away from the PCIe x4 card (if any) to release the securing tab from the dent in the card.
Then, ease the card up and out of its connector and remove it from the computer.
Related Links

Installing the Expansion Card

Installing The Expansion Card
1. Insert the PCIe x4 card into the connector on the system board and press down to secure it in place.
2. Insert the PCIe x16 card (if any) into the connector on the system board and press down to secure it in place.
3. Install the front bezel.
4. Install the cover.
5. Follow the procedures in
Related Links
Removing The Expansion Card
After Working Inside Your Computer.
11