NOTE:
This step is applicable only for the connector with card retention latch, otherwise, lift the PCIe expansion card
out of the system.
5
Repeat the steps to remove any additional PCIe expansion card.
Installing PCIe expansion card
1
To install the PCIe expansion card:
a
Insert the PCIe expansion card to the connector on the system board [1].
b Pull the release latch backward to open [2].
c
Secure the PCIe expansion card by pushing the card retention latch until it clicks into place [3].
NOTE:
This step is applicable only for the connector with card retention latch, otherwise, skip this step.
36
Removing and installing components