Installing The Memory; Removing The Chassis Intrusion Switch - Dell OptiPlex 3010 Small Form Factor Owner's Manual

Related Links

Installing the Memory

Installing The Memory
1. Insert the memory modules into the connectors on the system board. Install the memory modules in the order of A1
> B1 > A2 > B2.
2. Press down on the memory modules until the retention clips spring back to secure them in place.
3. Install the drive cage.
4. Install the front bezel.
5. Install the cover.
6. Follow the procedures in
Related Links
Removing The Memory

Removing the Chassis Intrusion Switch

1. Follow the procedures in
2. Remove the cover.
3. Disconnect the intrusion-switch cable from system board.
4. Slide the intrusion switch inwards and remove it from the system board.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
15