Installing The Intrusion Switch; Removing The Speaker - Dell OptiPlex 3010 Small Form Factor Owner's Manual

Related Links

Installing the Intrusion Switch

Installing The Intrusion Switch
1. Insert the intrusion switch into the chassis rear and slide it outward to secure it.
2. Connect the intrusion-switch cable to the system board.
3. Install the cover.
4. Follow the procedures in
Related Links
Removing the Intrusion Switch

Removing the Speaker

1. Follow the procedures in
2. Remove the cover.
3. Remove the front bezel.
4. Remove the drive cage.
5. Disconnect the speaker cable from the system board.
6. Unthread the speaker cable from the fan shelter clip.
16
After Working Inside Your
Before Working Inside Your
Computer.
Computer.