Installing The Hard Drive; Removing The Memory - Dell OptiPlex 3010 Small Form Factor Owner's Manual

Related Links

Installing the Hard Drive

Installing The Hard Drive
1. Tighten the screws to secures the two hard drives to the hard drive bracket.
2. Flex the hard-drive bracket and then insert the single hard drive or two hard drives into the bracket.
3. Press the retention clips inwards and slide the hard-drive bracket into the drive cage.
4. Install the cover.
5. Follow the procedures in
Related Links
Removing The Hard Drive

Removing the Memory

1. Follow the procedures in
2. Remove the cover.
3. Remove the front bezel.
4. Remove the drive cage.
5. Release the memory-retention clips on each side of the memory modules.
6. Lift the memory modules out of the connectors on the system board.
14
After Working Inside Your
Before Working Inside Your
Computer.
Computer.