Table of Contents
Advertisement
Related Links
Removing The Input/Output (I/O) Panel
Removing the Power Supply
1.
Follow the procedures in
2.
Remove the cover.
3.
Remove the
front
bezel.
4.
Remove the
drive
cage.
5.
Remove the
fan
shelter.
6.
Disconnect the 4-pin power cable from the system board.
7.
Unthread the 4–pin power cable from the chassis clips.
8.
Disconnect the 24-pin power cable from the system board.
9.
Remove the screws that secure the power supply, from the back of the computer.
26
Before Working Inside Your
Computer.
Advertisement
Table of Contents
Need help?
Do you have a question about the OptiPlex 3010 Small Form Factor and is the answer not in the manual?
Questions and answers