Installing The Expansion Card; Coin Cell Battery; Removing Coin Cell Battery - Dell OptiPlex 7050 Small Form Factor Owner's Manual

Installing the expansion card

1 Insert the expansion card into the connector on the system board.
2 Press the expansion card until it clicks into place.
3 Close the expansion card latch and press it until it clicks into place.
4 Install the cover.
5 Follow the procedure in

Coin cell battery

Removing coin cell battery

1 Follow the procedure in
2 Remove the:
a cover
3 To remove the coin cell battery:
a Press the release latch until the coin cell battery pops out [1].
b Remove the coin cell battery from the connector on the system board [2].
After working inside your computer.
Before working inside your computer.
Removing and installing components 11