Help; Communication Commands; Sensor Commands; System Commands - AML Oceanographic AML-3 User Manual

directory
delete <filename>/all
delete <filename>/all yes
dump <filename>

5.6 Help

Command
display options
help

5.7 Communication commands

Command
set baud <baud rate>

5.8 Sensor commands

Command
display sensors
rawtalk <port>

5.9 System commands

Command
set fulltime <yyyy-mm-dd>
AML Oceanographic Ltd.
List all files present in the log directory.
Deletes a log file that matches the filename.
If 'all' is used instead of a file name, all files will be deleted.
If the 'yes' is not included in the command, a confirmation
is required.
If 'yes' Is included, the file(s) will be deleted without
confirmation.
Sends the contents of the specified file out the interface
port.
Description
Displays a full list of all configurable settings and their current
values.
Displays a menu of all commands.
Description
Set the serial baud rate for the instrument. All standard baud rates
between 9600 and 115200 are accepted. Default is 115200.
Note: This command takes immediate effect. Users must change
the BAUD rate of their terminal program.
Description
Print information about all connected sensors.
Start a rawtalk session with a connected sensor. Send <1s
pause>+++<1s pause> to exit the rawtalk session.
Description
Set the system date and time.
29 / 43