Conducting A Profile - AML Oceanographic AML-3 User Manual

Multiparameter logger instrument
Table of Contents

Advertisement

a. Note: A common action at this step is to tare the pressure sensor if required. This
is achieved by clicking the Gear Icon and selecting Tare Pressure Sensor.
9. The user is encouraged to explore the Instrument Settings page to familiarize
themselves with typical settings.
10. Optional: a common step for first time users is to commence real-time measurement
(data) streaming from the instrument. This is achieved through the Live Data tab in
Sailfish.
To disconnect the instrument, unplug the USB-C cable or click the 'Disconnect' button.

2.2 Conducting a Profile

The typical workflow for conducting a profile is as follows:
1. Turn the instrument on and connect it to Sailfish using either WiFi (preferred) or USB-C
(refer
Getting Started
sure to tare the pressure sensor if required.
2. The instrument's indicator LED will flash if it is attempting to acquire a GPS signal. If
GPS is locked, the instrument's LED will turn solid. Refer the LED Flash Patterns in
Section 1.5 for more details.
AML Oceanographic Ltd.
) and confirm the instrument's battery status and configuration. Be
15 / 43

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AML-3 and is the answer not in the manual?

This manual is also suitable for:

Aml-6 lgr

Table of Contents

Save PDF