AML Oceanographic AML-3 User Manual page 18

4. If the listener has been configured correctly, position data will be displayed in the tile and
the location icon will turn green.
5. It is now possible to sync the external listener location to the instrument by clicking the
'Instrument Settings' icon on the Device Tile and selecting 'Sync GPS to Listener'
6. If your instrument's location mode was previously set to 'GPS', you will be prompted to
set it to 'Manual'. Doing this will tell the instrument to ignore its on-board GPS module.
This synced position information will be stored and used in newly created log files until
the instrument's location is either synced again or the Location Mode is set back to
'GPS'. This can be done on the Instrument Settings page.
7. If connection to the GPS listener is lost, you can still sync to the last known location until
you disable the GPS listener or close Sailfish.
8. To automatically sync your instrument to the GPS listener every time you reconnect to
Sailfish, enable the 'Auto Update Instrument Location" setting.
AML Oceanographic Ltd. 18 / 43