Description And Specifications; 1.1 General Description; 1.2 Features; Front Panel Description - RTS WKP-1 User Manual

1 DESCRIPTION AND SPECIFICATIONS

1.1 GENERAL DESCRIPTION

Telex has refined the look of multi-location security with the
WKP-1 industrial keypanel. It offers simplified operation
and integrates seamlessly with RTS™ digital intercom
systems (RTS™ ADAM™/ZEUS™ intercom systems). The
physical size and weather-resistant design provides a
flexible, robust intercom system. The GPI relay switch lets
the user set up door latching, unlatching and other related
actions by pressing a single button from any panel in the
system.

1.2 FEATURES

E : The unit sustains exposure to rain, snow, and
NVIRONMENTAL
direct sun, allowing it to work in all environments. This
keypanel operates in temperatures ranging from -30° F to
120° F. The mechanical design of the aluminum front panel
and non-removable volume control knob, provide a vandal
resistant product.
GPI R : The WKP-1 has a local GPI relay four-pin
ELAY
terminal contact closure to give the user the functionality of
latching, unlatching doors or other related functions, with
the press of a button.
F P : Single button interface for push to talk
RONT ANEL
operation. There is a built-in water-resistant speaker for
listening capabilities. The panel has three LEDs used to
indicate Power ON, microphone (mic) ON, and Incoming
Call Signaling.
M : The WKP-1 has a built-in water resistant
ICROPHONE
Electret microphone. The microphone can be "hot mic"
enabled or disabled through the use of a dip switch setting.
K P A : All key assignments, GPIO opera-
EY ANEL SSIGNMENT
tion, and panel listen/muting functions are set through AZ
Edit™ software for the intercom matrix.
A C : The front panel volume controls adjust the
UDIO ONTROL
listen level to the internal speaker. An internal limit adjust-
ment sets the lower level of minimum volume achievable.
A P : An integral limiter/compressor insures
UDIO ROCESSING
the maximum intelligibility of the spoken word. The
compressor uses the RTS™ standard compression design.
D P : The keypanel can be powered locally through
UAL OWER
the 3-pin terminal or remotely via a RJ45 connection from
the breakout panel or remote power supply.
6
Figure 1. WKP-1 Reference View. (Numbered items refer to
front panel descriptions).
1.3

Front Panel Description

Speaker: The speaker is built-in and water resistant to
allow for dependable listening. An internal
volume control allows the user to set a lower
limit on the volume level, ideal for loud
environments, such as loading docks and
construction sites.
Volume Control: Controls the listen level of the speaker.
Microphone: Built-in, water resistant, electret microphone.
The Push To Talk button allows a user to
talk into the microphone and be heard at the
other end of the connection.
PUSH TO TALK
Button: Used to switch the microphone
ON to enable the user to talk to
the matrix.
POWER, MIC ON,
CALL Indicator LEDs:
POWER: A green LED appears when the keypanel
is on.
MIC ON: A green LED appears when the MIC ON
is active.
CALL: the Push To Talk button activates the
microphone for use and a green LED is seen.
Mounting Holes: The mounting holes fit any standard, two-
gang electrical box (3 inch depth minimum). The
electrical box is not included.
WKP-1 Digital Matrix Intercom System Industrial Keypanel